Yamaha HTR-6160 User Manual

y
See page 46 to display the input source information on the 
video monitor.

Rotate the R

INPUT selector (or press one 

of the input selector buttons (4)) to select 
the desired input source.

The name of the currently selected input source 
appears in the front panel display for a few seconds.

y
The corresponding input selector button on the remote 
control for the currently selected input source lights up for 
approximately 5 seconds after you press any buttons on the 
remote control, showing which source component is 
currently being operated.

Start playback on the selected source 
component or select a broadcast station.
• Refer to the operating instructions for the source 

component.

• See page 53 for details about FM or AM tuning 

instructions.

• See page 58 for details about XM Satellite Radio 

tuning instructions.

• See page 63 for details about SIRIUS Satellite 

Radio tuning instructions.

• See page 68 for details about iPod operations.
• See page 70 for details about Bluetooth component 

operations.

Rotate J

VOLUME (or press NVOLUME +/–) 

y
• See page 52 to adjust the level of each speaker.
• This does not affect the AUDIO OUT (REC) level.
• You can set the initial volume level and maximum volume 

level (see page 89).

Rotate the N

PROGRAM selector (or press 

B

PROG l / h repeatedly) to select the 

desired sound field program.
The name of the selected sound field program appears 
in the front panel display. See page 48 for details 
about sound field programs.

Sound field programs cannot be selected when the 
component connected to the MULTI CH INPUT jacks is 
selected as the input source (see page 43).

y
• Choose a sound field program based on your listening 

preference, not merely on the name of the program.

• When you select an input source, this unit automatically 

selects the last sound field program used with the 
corresponding input source.

• To display information about the currently selected sound 

field program in the OSD, see page 72 for details.

Caution
Extreme caution should be exercised when you play 
back CDs encoded in DTS. If you play back a CD 
encoded in DTS on a DTS-incompatible CD player, 
you will only hear some unwanted noise that may 
damage your speakers. Check whether your CD player 
supports CDs encoded in DTS. Also, check the sound 
output level of your CD player before you play back a 
CD encoded in DTS.

y
To play DTS-encoded CDs when using a digital audio 
connection, set “DECODER MODE” in “INPUT MENU” to 
“DTS” before the playback (see page 94).

Before performing the following operations, press 5AMP on 
the remote control.

  DVD

Sci-Fi