Roberts Radio RDK-2 User Manual

1.  Place the wire antenna so that it is as straight as possible extending 

either above or below the radio.

2.  Plug the mains lead into a wall socket and switch on the wall 

socket.

4.  The radio will then display "Clock not Set...".  The radio will scan for 

DAB signals and if a DAB signal is found it will then show the current 
time and date in the display.

5.  If no signal is received the radio will continue to display "Clock not 

Set". Try repositioning the antenna. Touch the On/Standby button and 
the radio will re-scan. If a signal is found the radio will then tune to a 
station and set the clock as soon as the time information is received. 
If necessary reposition again and touch the Auto tune button to re-
scan until stations are found.

5