Roberts Radio RDK-2 User Manual

You may store your preferred DAB and FM radio stations to the preset 
station memories (1 to 5). The procedure for setting presets and using 
them to tune stations is the same for FM and DAB modes, and is described 
below.  Note that the radio stores FM and DAB presets separately and so 
there are fi ve of each.

1. Touch 

the 

On/Standby button to switch on the radio.

2.   Tune to the radio required station as previously described.

3.  Touch the required Preset button for 2-3 seconds until the display 

shows e.g.  "Preset 1 saved". The station will be saved under the chosen 
preset button. Repeat this procedure for the remaining presets.

4.  Stations stored in preset memories may be over-written by following 

the above procedure.

1

3

1. Touch 

the 

On/Standby button to switch on your radio.

2.  Select the required waveband by touching the Band button.

3.  Momentarily touch the required Preset button, your radio will tune to 

the station stored in preset memory.

Note: If you have not previously stored a preset station and the preset 
buttons are pressed "Empty preset" will be displayed.

1

3

2