Panasonic 4301 Leaflet
All technical features and data are subject to changes without notice, resulting from continuous development and improvement.
Product Leaflet
Date of issue
Revision / Date of revision
MEW00308 2003-04-24
6
/
2008-09-15
Type number
4301
Analog photoelectric smoke detector
+
COM loop
Ext. LED
SA (L)
SA (L)
C
.i
.e
. EBL5
12
/ EBL
128
C
O
M
lo
op
in
p
u
t
SB (C)
SB (C)
SB
SB
E-
E-
SA
SA
E+
E+
Mark
Mark
SB
E-
SAo
E+
Mark
SAi
3312
4313
3312FL/F
In the detector:
See also "Engineering Instructions for detectors Type 430x".
SA/SB Contact pins for COM loop / address setting tool 3314
E+/E- Contact pins for External LED
Tl
E+/E- Contact pins for External LED
Tl
Type number label; Detector type
Al
Address label; For the programmed COM loop address to be written.
Lsh
Locking screw hole (prepared for drilling through detector body)
Ls Locking
screw
Prepared for mechanical locking with analog base 3312x / 4313. One hexagon socket screw
(Ls) is attached (1.5 mm Hex key to be used). The 2.5-2.7 mm hole (Lsh) has to be drilled.
(Ls) is attached (1.5 mm Hex key to be used). The 2.5-2.7 mm hole (Lsh) has to be drilled.
Technical data
Voltage (V DC)
rated
allowed
normal (on COM loop)
allowed
normal (on COM loop)
28
12-30
24
12-30
24
Current consumption at nom. volt.
from COM loop (mA)
from COM loop (mA)
quiescent
active (incl. internal LED)
ext. LED (connected via base 3312)
active (incl. internal LED)
ext. LED (connected via base 3312)
0.3
2.3
max. 2
2.3
max. 2
Ambient temperature (
°C)
operating
storage
storage
-10 to +50
-25 to +75
-25 to +75
Ambient humidity (% RH)
max. 95, non condensing
Ingress Protection rating (estimated)
IP 51
Sensitivity (obscuration; %/m)
NORMAL mode
2330 mode
2312 mode
Depending on the mode.
3.6 / 3.0 / 2.4 (Low / Normal / High)
3.5 (Normal)
2.6
Size
∅ x h (mm)
102 x 36
Weight (g)
68
Construction / Colour
Modified polycarbonate / Grey (N8, Munsell colour code)
Approvals
05 EC Certificate no. 0786-CPD-20144, EN54-7
SB
SA
E-
E+
Tl
Ls
Lsh
Al
The detector is plugged in the analog base 3312x / 4313.
The COM loop / Ext. LED are connected to the analog base.
The COM loop / Ext. LED are connected to the analog base.