Technoline Temperature Station WS 7050 User Manual
Product codes
WS 7050
OUTDOOR TRANSMITTER:
The Outdoor Transmitter is supplied with a holder that may be attached to a
wall with the three screws or double-sided tape supplied. To attach to the
wall using screws, please follow the steps below:
wall with the three screws or double-sided tape supplied. To attach to the
wall using screws, please follow the steps below:
1.
Mark the wall using a pen through the holes in the holder to obtain the
exact drilling position.
exact drilling position.
2.
Drill holes in the wall at the points marked.
3.
Screw holder onto wall.
The Outdoor Transmitter simply clicks in or out of the holder. When inserting or removing the
Outdoor Transmitter to or from the wall holder please hold both units securely to avoid tearing the
holder from the wall.
Outdoor Transmitter to or from the wall holder please hold both units securely to avoid tearing the
holder from the wall.
There is also double sided tape included with the wall holder. On smooth surfaces this can be
used instead of drilling holes. The mounting surface can, however, affect the transmission range.
If for example the unit is attached to a piece of metal, it may then either reduce or increase the
transmitting range. For this reason, we recommend not placing the unit on any metal surfaces or
used instead of drilling holes. The mounting surface can, however, affect the transmission range.
If for example the unit is attached to a piece of metal, it may then either reduce or increase the
transmitting range. For this reason, we recommend not placing the unit on any metal surfaces or
31