Technoline Temperature Station WS 7050 User Manual

Product codes
WS 7050
Page of 16
4. 
Neighbours using electrical products operating on the 433MHz signal can also cause 
interference. In most severe cases, the reception is only possible once all other electrical 
products using the 433MHz are switched off. 
5. 
Within thick concrete rooms such as basements and tower blocks, the 433MHz signal can 
be weakened (avoid placing near metal frames and structures). 
6. 
Transmission can be affected by exposure to extreme temperature conditions. For 
example, if the weather has been extremely cold (under -25ºC) for an extended period of 
time then the transmission signal may be weakened. (Please bears this in mind when 
positioning the transmitter). 
 
Note:  Should after checking the above list and the outdoor temperature is still not received, 
then reset the units (see Resetting the Remote Thermo below). 
 
RESETTING THE REMOTE THERMO:
 
1. 
Remove the batteries from the Remote Thermo and the transmitter(s) 
2. 
Wait at least 30 seconds and repeat the procedures specified in Setting up above. 
 
 
29