Technoline Temperature Station WS 7050 User Manual
Product codes
WS 7050
OUTDOOR TEMPERATURE 1, 2, AND 3
If the more than one transmitter is being used, to alternate between the temperature readings of
transmitter 1, 2, and 3, simply press the “CH” key. If the reading is from transmitter 1, then the
identification numbers 1 will be displayed in the outdoor temperature section of the LCD. The
same will apply to the next transmitter and so on. However, if only one transmitter is used, no
identification number will be displayed on the LCD.
transmitter 1, 2, and 3, simply press the “CH” key. If the reading is from transmitter 1, then the
identification numbers 1 will be displayed in the outdoor temperature section of the LCD. The
same will apply to the next transmitter and so on. However, if only one transmitter is used, no
identification number will be displayed on the LCD.
CHECKING FOR 433 MHz RECEPTION:
In normal surroundings (for example away from interfering sources such as TV sets), the outdoor
temperature can usually be easily received within 2-1/2 minutes. If the outdoor temperature is not
displayed on the LCD after 2-1/2 minutes, then check the following:
temperature can usually be easily received within 2-1/2 minutes. If the outdoor temperature is not
displayed on the LCD after 2-1/2 minutes, then check the following:
1.
The distance of the units should be at least 1.5 - 2.0 meters away from interfering sources
such as computer monitors or TV sets.
such as computer monitors or TV sets.
2.
Avoid placing the units onto or in the immediate proximity of metal doors, window
frames or structures.
frames or structures.
3.
Using other electrical products such as headphones and speakers that operate on the
same signal (433 MHz) can prevent the transmission pick up.
same signal (433 MHz) can prevent the transmission pick up.
28