Sennheiser EM 300-G3 User Manual
Putting the receiver into operation
17
To mount the antennas:
왘
Use remote antennas, if necessary in conjunction with the ASA 1
antenna splitter (see “Accessories and spare parts” on page 52).
antenna splitter (see “Accessories and spare parts” on page 52).
To mount the receivers into the rack:
왘
Slide the receivers into the 19” rack.
왘
Secure the rack mount “ears” to the 19” rack.
Connecting an amplifier/mixing console
The receiver’s ¼” (6.3 mm) jack socket
and XLR-3M socket
are
connected in parallel, allowing you to simultaneously connect two devices
(e.g. amplifier, mixing console) to the receiver.
(e.g. amplifier, mixing console) to the receiver.
왘
Use a suitable cable to connect the amplifier/mixing console to the
¼” (6.3 mm) jack socket
¼” (6.3 mm) jack socket
.
For detailed information on balanced and unbalanced connection,
please refer to the chapter “Connector assignment” on page 56.
please refer to the chapter “Connector assignment” on page 56.
XXX - XXX MHz
FREQ. RANGE-X:
SER. NO.: XXXXXXXXXX
TRUE DIVERSITY RECEIVER EM 300
IDENT. NO.: XXXXXX
IC: 2099A- XXXXXXX
DESIGNED IN GERMANY, ASSEMBLED IN USA
0682