Sennheiser EM 300-G3 User Manual

Putting the receiver into operation

18

Connecting receivers in a network

You can connect several receivers in a network. The receivers are remote
controlled via a PC running the “

Wireless Systems Manager

” (WSM) soft-

ware. This software will assist in the quick and safe configuration of multi-
channel systems.

For further information on downloading the software, visit the ew G3
product page on our website at www.sennheiser.com.

왘

Connect a standard network cable (at least Cat 5) to the LAN socket

of the receiver.

왘

Connect your receivers to an Ethernet switch.

왘

Additionally, connect a PC to the Ethernet switch as shown.

왘

Set up your multi-channel system as described on page 45.

The yellow LED

 at the rear of the receiver indicates the network

activity:

XXX - XXX MHz

FREQ. RANGE-X:

SER. NO.: XXXXXXXXXX

TRUE DIVERSITY RECEIVER EM 300

IDENT. NO.:  XXXXXX

IC: 2099A- XXXXXXX

DESIGNED IN GERMANY, ASSEMBLED IN USA

0682

Yellow LED ...

Connection status

... lit

Network cable connected to the Ethernet 
switch or PC

... off

No connection