Sennheiser EM 300-G3 User Manual

Using the receiver

21

To switch the receiver to 

standby mode

:

To completely switch the receiver 

off

:

왘

Disconnect the receiver from the mains by unplugging the mains unit
from the wall socket.
The backlighting of the 

STANDBY 

button

 goes off.

Monitoring the audio signal via headphones

왘

Set the headphone volume control 

 to the minimum position.

왘

Connect headphones with a ¼” (6.3 mm) stereo jack plug to the head-
phone output 

왘

Gradually increase the volume and monitor the audio signal with the
lowest possible volume.

왘

Keep the 

STANDBY

 button 

 pressed until “

OFF

” appears on

the display panel.
The receiver switches to standby mode.

When in the operating menu, pressing the 

STANDBY 

button

 will

cancel your entry (ESC function) and return you to the current stan-
dard display.

The 

STANDBY

 button 

 is backlit in red both during operation and

in standby mode.

CAUTION!

Danger of hearing damage!

Listening  at  high  volume  levels  for  long  periods  can  lead  to  permanent
hearing defects.

왘

Set the headphone volume control 

 to the minimum position before

putting the headphones on.

ew300 G3

B.Ch: 20.24

 MHz