Paradyne CSU User Manual
7. Operation and Maintenance
7-12
September
2002
9128-A2-GB20-80
Device Messages
These messages appear in the messages area at the bottom of the screens. All
device messages are listed in alphabetical order.
device messages are listed in alphabetical order.
Table 7-6.
Device Messages (1 of 6)
Message
What It Indicates
What To Do
Access level is
n,
Read-only.
User’s access level is 2 or
3; user is not authorized to
change configurations.
3; user is not authorized to
change configurations.
No action needed.
Already Active
Test selected is already
running.
running.
Allow test to continue.
Select another test.
Stop the test.
Blank Entries
Removed
Removed
New had been selected
from the Administer Logins
screen, no entry was made,
then Save was selected.
from the Administer Logins
screen, no entry was made,
then Save was selected.
No action needed.
Reenter the Login ID,
Password, and Access Level.
Password, and Access Level.
Cannot Delete Trap
Manager
Manager
Del ete was selected from
the Management PVCs
Options screen, but the
PVC had been defined as a
trap destination.
the Management PVCs
Options screen, but the
PVC had been defined as a
trap destination.
No action needed, or configure
another path for traps and try
again.
another path for traps and try
again.
Cannot Save – no
Level 1 Login IDs
Level 1 Login IDs
Security was being set up,
but all the logins were
assigned either Level-2 or
Level-3 access.
but all the logins were
assigned either Level-2 or
Level-3 access.
Set up at least one login with
Access Level-1 so the unit can be
configured.
Access Level-1 so the unit can be
configured.
Command Complete
Configuration has been
saved or all tests have been
aborted.
saved or all tests have been
aborted.
No action needed.
Connection Refused
(Seen at an FTP
terminal.)
terminal.)
Two menu-driven user
interface sessions are
already in use when a
Telnet session was
attempted.
interface sessions are
already in use when a
Telnet session was
attempted.
Wait and try again.
Destination Not
Unique
Unique
Destination entered is
already being used.
already being used.
Enter another destination
indicator.
indicator.
DLCI in connection.
Delete connection first
Delete connection first
User tried to delete a DLCI
that was part of a
connection.
that was part of a
connection.
No action needed, or
Delete the connection, then
delete the DLCI.
delete the DLCI.
DLCI Number Already
Exists
Exists
The DLCI number entered
on the DLCI Record Entry
screen has already been
created so is not unique.
on the DLCI Record Entry
screen has already been
created so is not unique.
Enter another DLCI number.
DLCI Number
Reserved
Reserved
User tried to designate a
special troubleshooting
DLCI.
special troubleshooting
DLCI.
No action is needed.