Polycom (RMX) 1500 User Manual

Page of 1010
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide 
3-18
Polycom, Inc.
Maximum CP Resolution Pane
In MPMx Card Configuration Mode the RMX can be set to one of the following Maximum CP 
Resolutions:
HD 1080p60
HD 1080p30
HD 720p30
SD  30
CIF  30
Limiting Maximum Resolution
Before a selection is made in this pane, the Maximum CP Resolution of the system is 
determined by the MAX_CP_RESOLUTION System Flag.
.
Resolution Configuration Pane
The Resolution Configuration pane and its selection options in MPMx Card Configuration Mode 
behave in the same manner as for MPM and MPM+ Card Configuration Modes as described in 
.
Resolution Configuration - Detailed
H.264 High Profile allows higher quality video to be transmitted at lower bit rates.
However, setting minimum bit rate thresholds that are lower than the default may affect the 
video quality of endpoints that do not support the H.264 High Profile. The RMX uses two 
decision matrices (Base ProfileHigh Profile) to enable endpoints to connect according to their 
capabilities. 
Sharpness and Motion
Sharpness and Motion are Video Quality settings that are selected per conference and are 
defined in the conference Profile. A conference with Sharpness selected in its Profile uses the 
Sharpness settings of the Resolution Configuration and a conference with Motion selected in its 
Profile uses the Motion settings of the Resolution Configuration dialog box.
The Sharpness and Motion tabs in the Resolution Configuration dialog box allow the user to 
view and modify Resolution Configuration settings for conferences with either Video Quality 
setting.
Resolution Configuration Sliders
The Detailed Configuration dialog box allows the administrator to configure minimum 
connection threshold bit rates for endpoints that support H.264 High Profile and those that 
do not support H.264 High Profile by using the following slider panes: