Polycom (RMX) 1500 User Manual

Chapter 14-Recording Conferences

Polycom, Inc.

To manage the recording process using the Conference toolbar:
>> In the Conferences pane, click one of the following buttons in the Conference tool bar.

    

      

By entering the appropriate DTMF code on the endpoint, the chairperson can Stop the 

recording (*74), Pause it (*75), or Start/Resume the recording (*73). For more information on 

managing the recording process via DTMF codes, see the RSS 2000 User’s Guide.

Conference recording is available with Codian VCR 2210, VCR 2220 and VCR 2240.
Recording between the RMX and the Codian VCR is enabled by adding an IP participant to 

the recorded conference that acts as a link between the conference and the recording device. 

This participant is identified as a recording link to the Codian VCR according to the product 

ID sent from the VCR during the connection phase, in the call setup parameters. 
The video channel between the conference and the recording device is unidirectional where 

the video stream is sent from the conference to the recorder.
If the Codian VCR opens a video channel to the conference - this channel is excluded from 

the conference video mix.
To record a conference running on the RMX using Codian recorder:
>> In the conference, define or add a dial-out participant using the Codian VCR IP address 

as the address for dialing.

The recording buttons will only be displayed in the conference tool bar for a conference that is 
recording-enabled.

Start/Resume recording. This button toggles with the Pause button.

Stop recording.

Pause recording. This button toggles with the Start/Resume button.