Polycom (RMX) 1500 User Manual

Page of 1010
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide 
21-28
Polycom, Inc.
The Alarm-MIB
MIB used to send alarms. When a trap is sent, the Alarm-MIB is used to send it.
H.341-MIB (H.341 – H.323)
Gives the address of the gatekeeper.
Supports H.341-MIB of SNMP events of H.323.
Standard MIBs
This section describes the MIBs that are included with the RMX. These MIBs define the 
various parameters that can be monitored, and their acceptable values.  
interfaces
mib-2 2
ip
mib-2 4
MIB Name
Description
MULTI-MEDIA-MIB-TC 
(MULTIMTC.MIB)
Defines a set of textual conventions used within the set of Multi Media 
MIB modules.
H.320ENTITY-MIB 
(H320-ENT.MIB)
This is a collection of common objects, which can be used in an H.320 
terminal, an H.320 MCU and an H.320/H.323 gateway. These objects 
are arranged in three groups: Capability, Call Status, and H.221 
Statistics.
H.320MCU-MIB (H320-
MCU.MIB)
Used to identify managed objects for an H.320 MCU. It consists of four 
groups: System, Conference, Terminal, and Controls. The Conference 
group consists of the active conferences. The Terminal group is used to 
describe terminals in active MCU conferences. The Controls group 
enables remote management of the MCU.
H323MC-MIB (H323-
MC.MIB)
Used to identify objects defined for an H.323 Multipoint Controller. It 
consists of six groups: System, Configuration, Conference, Statistics, 
Controls and Notifications. The Conference group is used to identify the 
active conferences in the MCU. The Notifications group allows an MCU, 
if enabled, to inform a remote management client of its operational 
status.
Note: The RMX supports only one field in H.341-H323MC MIB. The 
RMX reports the Gatekeeper address using H.341-H323MC MIB – 
323McConfigGatekeeperAddress (0.0.8.341.1.1.4.2.1.1.4) in response 
to a query from a manager.
MP-MIB (H323-MP.MIB)
Used to identify objects defined for an H.323 Multipoint Processor, and 
consists of two groups: Configuration and Conference. The 
Configuration group is used to identify audio/video mix configuration 
counts. The Conference group describes the audio and video multi-
processing operation.
Table 21-9  
Supported MIB-II Sections (Continued)
Section
Object Identifier