Polycom (RMX) 1500 User Manual
Polycom, Inc.
B-1
Appendix B
Alarms and Faults
Alarms
Table B-1
Alarms
Alarm Code
Alarm Description
A new activation key was loaded. Reset
the system.
the system.
A new activation key was loaded:
Reset the MCU.
Reset the MCU.
A new version was installed. Reset the
system.
system.
A new version was installed:
Reset the MCU.
Reset the MCU.
Alarm generated by a Central Signaling
component
component
A system alert was generated by a component of the Central Signaling.
Alarm generated by an internal
component
component
A system alert was generated by an internal system component.
Automatic reset is unavailable in Safe
Mode
Mode
The system switches to safe mode if many resets occur during startup. To
prevent additional resets, and allow the system to complete the startup
process the automatic system resets are blocked.
prevent additional resets, and allow the system to complete the startup
process the automatic system resets are blocked.
Backup of audit files is required
If the ENABLE_CYCLIC_FILE_SYSTEM_ALARMS is set to YES (default
setting when ULTRA_SECURE_MODE System Flag is set to YES) and a
Cyclic File reaches a file retention time or file storage capacity limit, the user is
alerted that audit files need to be backed up.
setting when ULTRA_SECURE_MODE System Flag is set to YES) and a
Cyclic File reaches a file retention time or file storage capacity limit, the user is
alerted that audit files need to be backed up.
Backup of CDR files is required
If the ENABLE_CYCLIC_FILE_SYSTEM_ALARMS is set to YES (default
setting when ULTRA_SECURE_MODE System Flag is set to YES) and a
Cyclic File reaches a file retention time or file storage capacity limit, the user is
alerted that CDR files need to be backed up.
setting when ULTRA_SECURE_MODE System Flag is set to YES) and a
Cyclic File reaches a file retention time or file storage capacity limit, the user is
alerted that CDR files need to be backed up.
Backup of log files is required
If the ENABLE_CYCLIC_FILE_SYSTEM_ALARMS is set to YES (default
setting when ULTRA_SECURE_MODE System Flag is set to YES) and a
Cyclic File reaches a file retention time or file storage capacity limit, the user is
alerted that log files need to be backed up.
setting when ULTRA_SECURE_MODE System Flag is set to YES) and a
Cyclic File reaches a file retention time or file storage capacity limit, the user is
alerted that log files need to be backed up.
Bios version is not compatible with Ultra
Secure Mode.
Secure Mode.
The current BIOS version is not compatible with Ultra Secure Mode
(ULTRA_SECURE_MODE=YES).
(ULTRA_SECURE_MODE=YES).
Card failed to switch to Ultra Secure
Mode
Mode
Card failure occurred when the system was set to Ultra Secure Mode
(ULTRA_SECURE_MODE=YES).
(ULTRA_SECURE_MODE=YES).
Card failure
Possible reasons for the card failure:
•
Resetting Card
•
Resetting component
•
Unknown shelf error
•
Unknown card error