JVC GR-DVM5 User Guide

EN 

The battery pack has not been charged at the factory. Before installing it in the camcorder, be sure to charge
it with the AC Charger Station (

Z

 pg. 10). It is also possible to charge the battery pack installed in the

camcorder (

Z

 pg. 59).

Slide down the open switch.

Insert the 

 mark end of the battery first.

Inserting the battery backwards will result in
malfunction.

●

To remove the battery pack, turn off the
camcorder and open the the battery cover so that
the battery pack comes out halfway. Then pull out
the battery pack.

●

Be careful not to drop the battery pack.

Perform charging where the temperature is between 10° and 30°C (50°F and 86°F). 20° to 25°C (68°F to 77°F)
is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete.

Continuous shooting is possible (See table below for recording time) under the following conditions:
• The temperature is approximately 20°C/68°F

• If the temperature is below 10°C/50°F, or
• If zoom or Record-Standby is engaged or LCD monitor is used repeatedly, continuous shooting capability

is reduced significantly. Before extended use, it is recommended that you prepare enough battery packs to
cover 3 times the planned shooting time.

Using one battery (BN-V607U) installed in the camcorder

Using one battery (BN-V615U) installed in the optional Battery
Holder* attached to the camcorder

BN-V607U x 2

BN-V607U &
BN-V615U

Using a BN-V856U battery**

Using two batteries; one (BN-V607U) installed

in the camcorder and one (BN-V607U or BN-

V615U) installed in the optional Battery

Holder* attached to the camcorder

60

50

* The Battery Holder is included in the optional VU-V615KITU Battery Holder Kit.
** The BN-V856U battery, as well as the AA-V80U AC Power Adapter/Charger for charging it, is included in

the optional VU-V856KITU Extended-Use Battery Pack Kit.