JVC GR-DVM5 User Guide

 EN

To insert a battery pack, slide the battery lock
switch to the release position and insert the
battery 

 end first. To prevent the battery pack

from falling out, be sure to slide the battery lock
switch to the lock position.

Insert the Battery Holder’s nub into the mounting
socket on the bottom of the camcorder and slide
the camcorder lock lever to the lock position.

• To detach the camcorder, press the release

button on the lock lever and slide the lock lever
to the release position. Then slide the battery
lock switch to the release position.

● When the battery remaining power indicator appears

as 

, that means the battery power is close to nil.

When the battery power is exhausted, power turns
off automatically.

● Each time you start shooting, the camcorder chooses

the battery pack that has more remaining power, and
uses that as the power supply. That means both
battery packs will be exhausted at roughly the same
time.

Insert the coupler of the provided DC cord into
the camcorder.

Connect the DC cord to the AC Charger Station’s
DC OUT jack.

When using the camcorder indoors, you can use the AC Charger Station (provided) instead of a battery.

Power lamp
When power is
supplied, the
power lamp lights.

For extended use, prepare the Battery Holder (included in the optional Battery Holder Kit VU-V615KITU), which
can be loaded with one battery pack. This Battery Holder can be used together with the battery installed in the
camcorder.

Plug the AC Charger Station’s power cord into an
AC outlet.

Since the AC Charger Station processes electricity
internally, it becomes warm during use. Be sure to use
it only in well-ventilated areas.