Klegg ndu10-160 Reference Guide
User Manual
Klegg Electronics Inc.
29
www.klegg.com
Convert to a basic disk
This operation will convert any member of bind to a basic disk. You can use this operation
if you want to remove a member from bind want to keep the bind itself.
if you want to remove a member from bind want to keep the bind itself.
Clear Defective Mark
If any bad sectors are detected While accessing Mirror(RAID1) bind, the device with bad
sectors will be marked as defective disk. In most case, it is recommended to replace the
disk. But if you want to continue to use the disk, you can just clear the defective mark to
retry.
sectors will be marked as defective disk. In most case, it is recommended to replace the
disk. But if you want to continue to use the disk, you can just clear the defective mark to
retry.
Configure RAID without this disk
If Mirror(RAID1) has a spare disk, you can remove one member disk using Configure
RAID without this disk. This operation can be useful if you want to remove a defective
member or want to remove a spare disk.
RAID without this disk. This operation can be useful if you want to remove a defective
member or want to remove a spare disk.