Bosch hbn5032auc User Manual

6 • English

•  The oven has rack guides at four levels as shown in 

the illustration on 

page 7.

 

Rack positions are numbered from the bottom rack 

guide (#1) to the top (#4).

•  Check cooking charts for best rack positions to use 

when cooking.

•  Make sure that the racks are level once they are in 

position.

•  The racks are designed to stop when pulled 

forward to their limit.

•  CAUTION! Never use aluminum foil to cover the 

oven racks or to line the oven. Heat trapped under 

the foil can cause damage to the oven liner.

 

 

 

 

To avoid possible burns, 

place oven racks in desired positions before turning 

the oven on. Always use oven mitts when the oven is 

warm.

Removing from oven: Grasp rack fi rmly on both sides 

and pull rack toward you. When the stop is reached, 

tilt rack up and pull the rest of the way out.

Replacing in oven: Grasp rack fi rmly on both sides. 

Tilt rack up to allow stop into rack holder. Bring rack to 

a horizontal position and press the rest of the way in. 

Rack should be straight and fl at, not crooked.

 

 

 

 

To avoid possible burns, 

 

 

 

 

To avoid possible burns, 

Back of Rack

Front of Rack

 Figure 5: The Flat Rack

Insert r

ack wi

th back of r

ack 

tow

ard back w

all of r

ange

Using Multiple Racks
2 Rack baking: Use positions 1 and 3.
3 rack baking: Use positions 2, 3 and 4.
When baking four cake layers at the same time, 

stagger pans so that one pan is not directly above 

another. For best results, place cakes on front of upper 

rack and back of lower rack (See graphic at right). 

Allow 1” -1 1/2” air space around pans.

See graphic at right.
Rack 4 - Highest position. Use for melting cheese 

quickly.
Rack 3 - Use for broiling most meats and for toasting  

bread.
Rack 2 - Use for pies, casseroles, breads, bundt or 

pound cakes, small roasts or poultry.  Also use for 

broiling thicker cuts of meat.
Rack 1 - Lowest Position. Use for angel food cake, 

large roasts and turkey.

 Figure 6: Rack Positions

 Figure 7: Multiple Rack Pan Placement