Lexmark X264dn User Manual

Disabled

Auto

Sets the size of the network input buffer

Auto is the factory default setting.

The value can be changed in 1-K increments.

The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.

To increase the maximum size range for the Network Buffer, disable or reduce
the size of the USB buffer.

Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.

On

Off
Auto

Sets the printer to process Macintosh binary PostScript print jobs

Auto is the factory default setting.

The Off setting filters print jobs using the standard protocol.

The On setting processes raw binary PostScript print jobs.

Reports Menu

Network Card menu
TCIP Menu

IPv6 Menu

Wireless menu

AppleTalk menu

Lists all the network setup menus, regardless of the active network of the printer

Note: Certain options are not available on selected printer models.

This menu is available from the Network/Ports menu:

Network/Ports  Standard Network or Network <x>  Std Network Setup or Net <x> Setup  Reports or
Network Reports

Print Setup Page Prints a report containing information about the current network setup

Note: The Print Setup Page contains information about the network printer settings, such as the
TCP/IP address.

Connected
Disconnected

Allows you to ascertain whether the Network Card is connected.

Reflects the speed of a currently active network card.

Understanding printer menus