Lexmark X264dn User Manual

802.11n

802.11b/g
802.11b/g/n

Specifies the wireless standard for the wireless network

Note: 802.11b/g/n is the factory default setting.

<list of available networks>

Lets you select an available network for the printer to use

Note: If the network you want to join is protected by a security setting,
you will have to join it from the Embedded Web Server or the Wireless
Setup Utility.

Lets you view the quality of the wireless connection

Lets you view the encryption method for the wireless connection.
“Disabled” indicates that the wireless network is not encrypted.

Yes

No

Activates or deactivates AppleTalk support

Note: Yes is the factory default setting.

Shows the assigned AppleTalk name

Shows the assigned AppleTalk address

<list of zones available on the
network>

Provides a list of AppleTalk zones available on the network

Note: The factory default setting is the default zone for the network. If no default
zone exists, the zone marked with an * is the factory default setting.

On
Off

Sets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language

On is the factory default setting.

When the Off setting is used, the printer does not examine incoming data.

When the Off setting is used, the printer uses PostScript emulation if the PS
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PS SmartSwitch setting is Off.

Understanding printer menus