Lexmark X264dn User Manual
53 Unformatted flash detected
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
to continue printing.
•
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Network <x> software error
The printer detects that a network port is installed, but cannot communicate with it. The printer disables all
communication to the associated network interface.
communication to the associated network interface.
Try one or more of the following:
•
Press
to clear the message and continue printing.
•
Turn the power off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
54 Standard network software error
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
to continue printing.
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
56 Standard USB port disabled
Try one or more of the following:
•
The printer discards any data received through the USB port. Press
to clear the message and continue printing.
•
Make sure the USB Buffer menu item is not set to Disabled.
58 Too many flash options installed
Try one or more of the following:
•
Turn the printer off, and then remove extra flash options:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess flash memory.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
•
Press
to clear the message and continue printing.
58 Too many trays attached
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
Troubleshooting
180