Lexmark X264dn User Manual
Printing information pages
See “Printing a menu settings page” on page 25 and “Printing a network setup page” on page 25 for more information
on printing these pages.
on printing these pages.
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
.
3
Press the arrow buttons until Reports appears, and then press
.
4
Press the arrow buttons until Print Fonts appears, and then press
.
5
Press the arrow buttons until PCL Fonts or PostScript Fonts appears, and then press
.
After the font sample list prints, Ready appears.
Printing a directory list
A directory list shows the resources stored in flash memory.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
.
3
Press the arrow buttons until Reports appears, and then press
.
4
Press the arrow buttons until Print Directory appears, and then press
.
After the directory list prints, Ready appears.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down
and
while turning the printer on.
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4
Press the arrow buttons until Prt Quality Pgs appears, and then press
.
The print quality test pages print.
5
Press the arrow buttons until Exit Config Menu appears, and then press
.
Resetting the Printer
appears briefly, followed by a clock, and then Ready appears.
Printing
67