Bosch ltc-0335-28 Installation Instruction

104 en | Devices page

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

Allows you to trace SNMP trap OIDs. You can receive traps from all devices in your network or 

only from selected ones. You can filter the traps to be received and you can add OIDs and 

values of selected traps to the SNMP Trap Filter Rules: table.

Click to start or stop a tracing process. 

Enter the IP address or DNS name of a device. Only traps from this device are traced.

Enter a string a trap can contain. You can use * and ? as wildcards. Strings in {} are treated as 

regular expressions. Only traps containing such a string are traced.

Displays the traps that are received by a tracing process.

Click to remove all entries in the Received Traps field.

Displays the trap details. You can copy the OID and the Value entry to the SNMP Trap Filter 

Rules: table.

Main window > 

 Devices > Expand 

 > 

Allows you to add a CCTV keyboard connected to a Bosch Video Management System 

workstation or to a decoder.

Click to add a row to the table for configuring a keyboard. 

Click to remove the selected row.

Displays the type of the keyboard that is connected to your workstation. 

In a cell, select the required connection of the keyboard to a workstation or a decoder. If you 

select a workstation, the keyboard is also added to the 

 > 

 page.

In a cell, select the desired COM port.

In a cell, select the maximum rate, in bits per second (bps), that you want data to be 

transmitted through this port. Usually, this is set to the maximum rate supported by the 

computer or device you are communicating with.

Displays the number of data bits you want to use for each character that is transmitted and 

received.