Bosch ltc-0335-28 Installation Instruction
Bosch Video Management System
Encoders / Decoders page | en
111
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
18
Encoders / Decoders page
To configure an encoder:
Main window >
Devices > Expand
> Expand
> Expand
>
or
Main window >
Devices > Expand
> Expand
>
or
Main window >
Devices >
>
To configure a decoder:
Main window >
Devices > Expand
> Expand
>
Allows you to make the required settings for each device.
Most of the settings on the encoder/decoder pages are active immediately after you click
. When you click another tab without clicking
and changes have occurred, two
corresponding message boxes are displayed. Confirm them both if you want to save.
To change the access password right-click the device icon and click Change password.
To display the device in a Web browser right-click the device icon and click Show Webpage in
Browser.
Note:
Depending on the selected encoder or camera, not all pages described here are available for
each device. The wording used here for describing the field labels can deviate from your
software.
Click a tab to display the corresponding property page.
18.1
Main Settings > Unit Access page
Device name
Type the name of the device.
The name simplifies the management of multiple devices in large systems. The name is used
for identification of a device. Use a name that makes it as easy as possible to identify its
location.
Do not use any special characters in the name. Special characters are not supported and may
cause problems, e.g. with playback.
Click
to update the name in the Device Tree.
Device ID
Type the ID of the device.
Initiator name
Displays the name of the iSCSI client, which has access to iSCSI targets. The initiator name is
automatically displayed after a connection is established.