Bosch ltc-0335-28 Installation Instruction

Bosch Video Management System

 Encoders / Decoders page | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

The camera name facilitates the identification of the remote camera location, e.g. in case of an 

alarm. Use a name that makes it as easy as possible to identify the location.

Do not use any special characters in the name. Special characters are not supported and may 

cause problems, e.g. play back of recordings. The settings on this page apply to all camera 

inputs.

Click 

 to update the name in the Device Tree.

This function allows you to display important supplementary information in the video image. 

These information can be enabled individually.

Set the position of the camera name overlay.

Click the item you want to select.

–

No camera name is displayed in the video image.

–

The camera name is displayed at the bottom of the video image.

–

The camera name is displayed on the top of the video image.

–

Enter the position where the camera name is displayed in the video image.

Set the position of the time overlay.

Click the item you want to select.

–

No time and date is displayed in the video image.

–

The time and date is displayed at the bottom of the video image.

–

The time and date is displayed on the top of the video image.

–

Enter the position where the time and date is displayed in the video image.

If necessary, you can also display milliseconds. This information can be useful for recorded 

video images; however, it does increase the processor's computing time.

Click the item you want to select.

–

Milliseconds are displayed on the video image.

–

Milliseconds are not displayed on the video image.

Enter the message to be displayed in case of an alarm. The maximum text length is 

31 characters.

Click the item you want to select.

–

In case of an alarm a message is displayed on the video image.