Bosch ltc-0335-28 Installation Instruction

Bosch Video Management System

 Encoders / Decoders page | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

This function allows you to set the gain of the audio signals to suit your specific requirements.

The current video image is shown in the small window next to the slide controls to help you 

check the selected audio source and improve assignments. Your changes are effective 

immediately.

The numbering of the audio inputs follows the labeling on the device and the assignment to 

the respective video inputs. The assignment cannot be changed for Web browser connections.

Enter the value of the gain of the audio signal. Make sure that the display of the slider 

 

remains green.

Enter the value of the gain. Make sure that the display of the slider 

 remains green.

Enter the value of the gain for the microphone.

Enter the value of the gain of the line and the loudspeaker.

Allows you to configure multiple areas on the camera image which are not recorded and 

cannot be viewed. For example, you might want to hide public places adjacent to your 

property.

Active recordings are indicated by 

.

If you point to the icon, you see detailed information about the active recordings.

Specify how the device's recordings should be managed:

–

The recordings are managed locally on the device. All relevant settings must be carried 

out manually. The device is removed from the VRM system.

If activated, no further settings are required on this page.

–

The recordings of this device are managed by the VRM system, which is considered 

external from the point of view of the device. 

If activated, no further settings are required on this page.

–

Not supported.

If activated, the oldest recordings are deleted as soon as the medium is full. A loop recording 

process occurs.

If not activated, nothing more is saved to the medium once it is full.