Bosch ltc-0335-28 Installation Instruction
136 en | Cameras and Recording page
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
Motion Recording (only NVR)
In the Quality column, click a cell to disable recording or to select the stream quality of
stream 1.
In the
column, click a cell to activate audio.
In the Pre-event [s] column, click a cell to select the recording time before the motion event
in seconds.
In the Post-event [s] column, click a cell to select the recording time after the motion event in
seconds.
Alarm Recording (only NVR)
In the Quality column, click a cell to select the stream quality of stream 1.
To enable alarm recording, configure a corresponding alarm.
In the
column, select a check box to activate audio.
In the Pre-event [s] column, click a cell to select the time before the alarm in seconds.
In the Post-event [s] column, click a cell to select the time after the alarm in seconds.
21.3
Copy Recording Settings dialog box (NVR only)
Main window >
Cameras and Recording > Click an icon for recording device, for
example
> Click a Recording Schedule tab (for example
) >
Allows you to copy recording settings from one Recording Schedule to another.
Copy all
Click to copy all recording settings of the selected schedule to another schedule.
Copy current selection
Click to copy only the recording settings of the selected table rows to another schedule.
21.4
Stream Quality Settings dialog box
Main window >
Cameras and Recording >
Allows you to configure stream quality profiles that you can later assign to the recording
modes.
A stream quality combines video resolution, frame rate, maximum bandwidth, and video
compression.
Click to add a new stream quality.
Click to delete a selected stream quality. You cannot delete the default recording settings.
Name:
Displays the name of the stream quality. When you add a new stream quality, you can change
the name.
Video resolution:
Select the desired video resolution.