Bosch ltc-0335-28 Installation Instruction
14
en | Network configuration
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
4
Network configuration
You can connect the following hardware to Bosch Video Management System:
–
Various IP cameras and encoders
Connected via network
–
Live only encoders with local storage
Connected via network
–
Connected via network
–
VIDOS NVR computer
Connected via network
–
Analog cameras
Connected to encoders, DiBos System
–
Decoders
Connected via network
–
Analog monitors
Connected to a decoder, to a Bosch Allegiant matrix, to a Bosch Video Management
System Client workstation
–
DiBos system (see the data sheet for Bosch Video Management System for supported
versions)
Connected via network
–
Bosch Allegiant matrix (Firmware version: 8.75 or greater, MCS version: 2.80 or greater)
Connected to a COM port of the Central Server or to a remote computer and to an IP
encoder on the network.
–
CCTV keyboard
Connected to the COM port of an Bosch Video Management System workstation
(Firmware version: 1.82 or greater) or to a hardware decoder (VIP XD).
If you connect the keyboard to a workstation, the user can control the complete system
with the keyboard. If you connect the keyboard to a VIP XD decoder, the user can only
control analog monitors with the keyboard.
Only the Bosch IntuiKey Digital Keyboard is supported.
–
SMS device
Connected to a COM port of the Central Server
–
SMTP E-mail server
Connected via network
–
Connected via network
–
Connected via network
–
Connected via network
CAUTION!
Do not connect a device to more than one Bosch Video Management System! This can lead to
recording gaps and other undesired effects.