Bosch ltc-0335-28 Installation Instruction
Bosch Video Management System
Network configuration | en
15
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
–
I/O modules
Connected via network
Only ADAM devices are supported.
All devices connected via network are connected to a switch. The computers of the Bosch
Video Management System are also connected to this device.
4.1
Installing hardware
The following illustration shows an example of a small Bosch Video Management System
network with NVR / DVR storage:
Additionally you can connect the following devices:
–
ATM / POS (Automatic Teller Machine / Point of Sale)
–
RAID subsystems to increase storage capacity
–
CCTV keyboard
Only Bosch IntuiKey Digital Keyboard is supported.
–
I/O modules
Only ADAM devices are supported.
–
Local storage encoders
1
Bosch Allegiant matrix with cameras and monitor: Connected to a COM port of one of
the computers of the network and to IP encoders connected to the network
2
Central Server
3
Primary NVR
4
Failover NVR, Redundant NVR
5
Encoders with analog cameras
6
IP cameras and IP AutoDomes
7
Communication devices: SMTP E-mail server connected to network, GSM device
connected to a COM port of the Central Server
8
Virtual inputs
9
Operator Client workstations, Configuration Client workstation
10
Monitors connected to a decoder (analog monitor groups for alarm processing are
possible)
11
DiBos Systems (only version 8 is supported) with cameras