Bosch ltc-0335-28 Installation Instruction

144 en | Alarms page

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

Click to determine that the live image of the camera is displayed in case of an alarm.

Click to determine that instant playback of the camera is displayed.

The rewind time for instant playback is configured in the Global Alarm Settings dialog box, 

see Section 23.1 Global Alarm Settings dialog box, page 142.

Select the check box to display the alarm instant playback camera with paused instant 

playback. The user can start instant playback if needed.

Select the check box to enable alarm recording for this camera in case of an alarm. If an alarm 

is triggered, this camera is recorded in alarm recording quality. The duration of the recording 

is the duration of the alarm state plus pre- and post-alarm time. This setting directly changes 

the setting for alarm recording in the Alarm Options dialog box and vice versa.

Main window > 

 Alarms > 

 or 

 > Alarm Image Panes column > Audio File 

column > Click ...

Allows you to select an audio file that is played in case of an alarm. 

Click to play the selected audio file. 

Click to pause the selected audio file. 

Click to stop the selected audio file. 

Click to display the Resource Manager dialog box.

Main window > 

 Alarms > 

 or 

 > Alarm Options column > ...

Allows you to configure the following settings for alarms: 

–

Cameras that start recording in case of an alarm

–

Enabling protection for these alarm recordings (only for NVR recording)

–

Triggering PTZ commands in case of alarm

–

Notifications that are sent in case of an alarm

–

Workflow that has to be processed in case of an alarm

–

Assigning cameras that are displayed in analog monitor groups in case of an alarm.

Displays the camera number as configured on the Cameras and Recording page.