Bosch ltc-0335-28 Installation Instruction

Bosch Video Management System

 User Groups page | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

Select the check box to allow closing the Operator Client.

Select the check box to allow minimizing the Operator Client.

Select the check box to allow the user to speak on the loudspeakers of an encoder with audio-

in and audio-out function.

Select the check box to allow manual alarm recording.

If you clear this check box, the Metadata permissions for all available cameras on the Camera 

Permissions page are cleared and disabled.

Select the check box to allow access to the VRM Monitor software.

Select the check box to allow updating the reference image in the Operator Client.

Select the check box to allow selecting the area in the camera image for updating the 

reference image in the Operator Client.

Select the check box to limit the access to recorded videos.

In the list, enter the number of hours.

Main window > 

 User Groups > 

 > Priorities tab

Allows you to configure the timeout for explicit PTZ locking. You can set the priorities for PTZ 

control and the display of incoming alarms.

Move the appropriate slider to the right to decrease the priority for acquiring PTZ controls and 

Bosch Allegiant trunk lines. A user with a high priority can lock the PTZ controls or the control 

of a trunk line for users with lower priorities. You set the timeout for locking PTZ control on 

the Timeout in min. field. The default setting is 1 minute.

Move the slider to adjust the priority value of Live Image window or Playback Image window. 

This value is required for incoming alarms to decide whether this alarm is automatically 

displayed in the Alarm Image window.

For example: If you move the slider for Live Image window to 50 and for the Playback Display 

to 70 and an alarm comes in with a priority of 60, the alarm is only automatically displayed if 

the user has Playback Display active. The alarm is not automatically displayed when the user 

has Live Display active.

Enter the time period in minutes.