Bosch ltc-0335-28 Installation Instruction

Bosch Video Management System

 User Groups page | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

You can select or clear this check box only when the PTZ control of a camera is globally 

enabled on the Permissions page.

Select a check box to allow the user to set prepositions of this PTZ camera.

You can select or clear this check box only when the PTZ control of a camera is globally 

enabled on the Permissions page.

Select a check box to allow updating the reference image of this camera.

Main window > 

 User Groups > 

 >Decoder Permissions tab

Allows you to configure the decoders that the users of this group have access to.

Displays the available decoders.

Click the check box to give the user group access to this decoder. 

Main window > 

 User Groups > 

 > User Interface tab

Allows to configure the user interface of 4 monitors used by the Operator Client. 

Select the control monitor which displays Live Mode only.

Select the alarm monitor which can display either Live and Alarm Mode or only Alarm Mode.

In the corresponding list, select the required entry. 

Select the check box to activate that the system remembers the last state of the user 

interface when the user logs off from the Operator Client. If the check box is not selected, the 

Operator Client starts always with the configured user interface.

Click to restore the default settings of this page.

Click to import an XML file with user interface settings.

Click to display a dialog box for unloading imported interface settings.