Bosch ltc-0335-28 Installation Instruction

Bosch Video Management System

 Troubleshooting | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

If you want to change the display language for the setup of Bosch Video Management System, 

you must switch the language in your Windows. For activating the language settings the 

computer is restarted after performing the following steps.

1.

Click Start, click Control Panel, and then double-click Regional and Language Options.

2.

Click the Advanced tab, under Language for non-Unicode programs, select the desired 

language.

3.

Click OK.

4.

In each of the next message boxes, click Yes.

Your computer is restarted.

1.

Plug in the cable again or wait until the workstation is online.

The Off Line message disappears.

2.

Press the Terminal softkey to enter Bosch Video Management System.

1.

Start Operator Client.

2.

View the newest Operator Client log file: 

C:\Documents and Settings\All Users\Application 
Data\Bosch\VMS\Log\BvmsClientLog.* 

3.

Look for a line like the following:

2007-09-26 15:39:56,442 26036 [GUI Thread] INFO 
Bosch.Vms.Dvs.VideoSDK.EntryPoint CreateLocalAudioSource - audioSource 
inputNr 1 has the name 'Microphone' 

The number for the microphone entry can be different on your system.

Note this number, in this example it is the number 1.

Configuration Client crashes.

If there are many cameras 

configured in an Allegiant file 

which are not connected to 

Bosch Video Management 

System, you can reduce this 

number. This avoids 

unnecessary system load. 

number of Allegiant cameras.

Operator Client crashes.

DiBos Web client is installed 

and has been started on the 

computer where Operator 

Client is installed.

Uninstall the DiBos Web 

client.