Bosch ltc-0335-28 Installation Instruction

168 en | Troubleshooting

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

4.

Edit the Operator Client configuration file: 

C:\<Bosch installation 
directory>\Bosch\VMS\bin\OperatorClient.exe.config 

5.

Look for a line like the following:

<add key="MicrophoneInputNr" value="2"/>

If the number for the microphone differs from the number found in the log file, change 

the number here to the number in the log file. In this example, change to number 1.

6.

Restart Operator Client.

Now the microphone is used as input source.

You need the Allegiant Master Control Software to edit the Allegiant file.

1.

Start the Master Control Software.

2.

Open the Allegiant file.

3.

Click the Camera tab.

4.

Mark the cameras that are not required.

5.

On the Edit menu, click Delete.

6.

Save the file. The file size remains unchanged.

7.

Repeat the last step for monitors that you do not need. Click the Monitors tab.

8.

Import this file in Bosch Video Management System (see Section 6.3 Adding a device,