Bosch ltc-0335-28 Installation Instruction

en | Configuring devices

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

1.

Click .

The Network Scan dialog box is displayed and all available NVRs, decoders, and 

encoders are detected.

The detected decoders are listed in the Decoders list and assigned automatically to the 

 tree item of the Device Tree. If no analog monitor group has already been created, 

the detected decoders are added to a new analog monitor group under 

 > 

.

If you do not want to use a decoder or an NVR, remove the item manually: right-click the 

item and click Remove.

The detected NVRs are assigned automatically to the 

 tree item of the Device Tree.

2.

In the Unassigned Encoders list, select an encoder and drag it to an NVR in the Assigned 

Encoders and NVRs list. The encoder’s cameras are recorded on the selected NVR.

3.

Repeat the above step for every detected encoder that you want to be part of your 

system. Encoders that you do not drag to an NVR, are completely invisible in Bosch Video 

Management System.

4.

Click Next  >.

If required, a dialog box is displayed for changing the device names of the connected 

devices of the detected IP devices to be used for display. Bosch Video Management 

System names the devices with default names. If desired, you can use the existing names 

of the devices.

5.

Make the required settings. For changing the displayed device names of a complete 

column at once, right-click a column with check boxes and click Select Column.

6.

Click Finish.

Main window > 

 Devices > 

 VRM & iSCSI Devices Scan > Bosch VMS Scan Wizard 

dialog box

You scan the network to detect the following devices:

–

VRMs

–

iSCSI devices: you add them manually.

–

Live only and local storage encoders

–

VIDOS NVRs

You scan for each device group separately. Just right-click the appropriate item in the Device 

Tree, for example right-click VRM Devices and click Scan VRM Devices.

1.

Select the desired check boxes for the device types that you want to integrate.

Click Next >>.

2.

Select the desired check boxes for the VRM devices that you want to integrate.

Click Next >>.

3.

Click Add iSCSI device.

The Add iSCSI Device dialog box is displayed.