Bosch ltc-0335-28 Installation Instruction
24
en | Configuring devices
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
–
–
–
–
CCTV keyboard
–
–
I/O module
–
Allegiant CCL emulation
To add a DiBos system:
1.
Right-click .
2.
Click Add DiBos Recorder.
The Add DiBos System dialog box is displayed.
3.
Enter the appropriate values.
4.
Click Scan DiBos.
The DiBos system is added to your system.
5.
In the displayed message box, click OK to confirm.
To add a Bosch Allegiant device:
1.
Right-click
and click Add Allegiant.
The Open dialog box is displayed.
2.
Select the appropriate Allegiant configuration file and click OK.
The Bosch Allegiant device is added to your system.
Note: You can add only one Bosch Allegiant matrix.
To add a Bosch Video Management System workstation:
1.
Right-click
and click Add Workstation.
The Add Workstation dialog box is displayed.
2.
Enter the appropriate value click OK.
The workstation
is added to your system.
To add an analog monitor group:
1.
Expand
, right-click
and click Add Monitor Group.
The Create New Analog Monitor Group dialog box is displayed.
If you already have performed a network scan, and decoders have been detected, there is
already a default analog monitor group available with all detected decoders assigned.
2.
Make the appropriate settings.
3.
Click OK.
The analog monitor group is added to your system.
NOTICE!
After having added a device, click
to save the settings.