Bosch ltc-0335-28 Installation Instruction

Bosch Video Management System

 Configuring devices | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

Main window > 

 Devices > Expand 

1.

Right-click 

 and click Change Network Address.

The Change Network Address dialog box is displayed.

2.

Change the entry in the field according to your requirements.

Main window > 

 Devices > Expand 

 > 

 > Settings page

You must enable Forensic Search on a workstation.

Enable video content analysis on each encoder. Use the VCA page of the encoder in the 

Device Tree.

To enable Forensic Search:


Click to select the Enable Forensic Search check box.

Main window > 

 Devices > Expand 

 > 

 > Analog Monitor Groups page

You assign an analog monitor group to a Bosch Video Management System workstation. In the 

Options dialog box, you can configure that all workstations can control analog monitor groups 

regardless of the setting here.

To assign an analog monitor group:


In the Assigned Analog Monitor Groups column, select the check box.

Main window > 

 Devices > Expand 

 > 

You configure the monitors in an analog monitor group logically in rows and columns. This 

arrangement does not have to meet the physical arrangement of the monitors.

1.

In the Name: field, type a name for the analog monitor group.

2.

In the Columns: and Rows: fields, enter the desired values.

3.

Drag each available decoder to an analog monitor image on the right.

The logical number of the decoder is displayed as a black number on the monitor image 

and the color of this image changes.

If no decoder is available, unassign a decoder from another analog monitor group or 

repeat network scan.

4.

Click the Advanced Configuration tab.

5.

Change the logical numbers of the assigned decoders as required. If you enter an already 

used number, a message box is displayed.