Bosch ltc-0335-28 Installation Instruction

en | Configuring events and alarms

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

Main window > 

 Events

or

Main window > 

 Alarms

This chapter provides information on how to configure events and alarms in your system.

The available events are grouped beyond their corresponding devices.

In the Events page, you configure when an event in your Bosch Video Management System 

triggers an alarm, executes a Command Script, and is logged. If an event is logged, it is also 

displayed in the Event List of the Operator Client.

Example (part of an Event Configuration Table): 

This example means:

If the video signal of the selected camera gets lost, an alarm is triggered, the event is logged, 

and no script is executed. This only happens if the event lasts at least 500 ms.

In Alarms, you define how an alarm is displayed, and which cameras are displayed and 

recorded in case of an alarm.

Some system events are configured as alarms by default.

Follow these references to get detailed information on the available application windows:

–

–

–

–

–

–



Click 

 to save the settings.



Click 

 to undo the last setting.



Click 

 to activate the configuration.

You can configure many objects simultaneously within a Camera Table, an Event Configuration 

Table, or an Alarm Configuration Table with a few clicks. 

For detailed information, see Section 9.1 Copying and pasting in tables, page 48.