Bosch ltc-0335-28 Installation Instruction
Bosch Video Management System
Configuring events and alarms | en
59
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
11.2
Removing a table row
Main window >
Alarms
You can only remove a table row that you or another user have added, i.e. you can delete
duplicated events or Compound Events.
Compound Events are located in the Event Tree under System Devices > Compound Events.
To remove a table row:
1.
Select the row.
2.
Click .
11.3
Managing resource files
For detailed information see:
–
11.4
Configuring an event
Main window >
Events
To configure an event:
1.
In the tree, select an event or event state, for example System Devices > Authentication
> Operator Authentication Rejected.
The corresponding Event Configuration Table is displayed.
2.
In the Trigger Alarm - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the alarm is triggered.
Select one of the Recording Schedules or Task Schedules that you have configured in the
Schedules page.
3.
In the Log - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the event is logged. Only a logged event is displayed in
the Event List of the Operator Client.
4.
In the Script - Script column, click a cell and select an appropriate Command Script.
5.
In the Script - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the event triggers the start of the Command Script.
6.
In the Minimum Event Time column, click a cell and type the number of milliseconds as
the minimum time between these events. Use this setting to prevent a switching sensor
from generating a large number of events.
11.5
Duplicating an event
Main window >
Events
You can duplicate an event to trigger different alarms for a particular event.
To duplicate an event:
1.
In the tree, select an event condition.
The corresponding Event Configuration Table is displayed.
2.
Select a table row.