Bosch ltc-0335-28 Installation Instruction
78
en | Configuration examples
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
To add the IP cameras to the Logical Tree:
Main window >
Maps and Structure
Drag the cameras to the Logical Tree.
To change camera properties:
Main window >
Cameras and Recording >
>
tab
1.
In the Live Quality column, configure the quality of live display. For these devices, you
can only set the live quality per camera, not schedule dependent.
2.
Make the appropriate settings in the other columns.
To configure recording settings for the cameras:
1.
Click a schedule tab, for example
.
2.
In the
column, click a cell and select the appropriate stream quality.
3.
Under Continuous or Prealarm Recording, in the Select column, select the desired
recording mode.
If you click Prealarm: Click a cell in the Duration [s] column to select the alarm recording
time before the alarm in seconds.
4.
Under Alarm Recording, in the Duration [s] column, click a cell and type the desired
recording time.
5.
Repeat the previous steps to configure the recording settings for the other camera.
To enable Forensic Search on a workstation:
Main window >
Devices > Expand
1.
Click the
icon of your workstation.
2.
Click the Settings tab.
3.
Click to select the Enable Forensic Search check box.
Performing a Forensic Search
Operator Client VRM main window >
>
Timeline tab
Perform the Forensic Search on the workstation where you have enabled Forensic Search.
To perform a Forensic Search:
1.
Using the Hairline, select the time period on the Timeline and select the corresponding
2.
Click .
The Forensic Search dialog box is displayed.
The selected time period is copied to the Start: and End: fields.
If required, change the values. Click
.
3.
In the Algorithm: list, select an IVA entry.
4.
In the Surveillance Tasks field, configure your Forensic Search.
You can find information on this in the relevant documents on the product CD supplied.