Manualsbrain.com
  1. Manuals
  2. Brands
  3. Bosch
  4. ltc-0335-28
  5. Installation Instruction

Bosch ltc-0335-28 Installation Instruction

Download
Page of 188
Bosch Video Management System
 Devices page | en
85
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
17
Devices page
Main window > 
 Devices 
Displays the Device Tree and the configuration pages.
Allows you to configure the available devices, such as encoders, decoders, NVRs, VRMs, local 
storage encoders, VIDOS NVRs, analog matrices, or peripheral devices like ATM / POS bridges.
To add NVRs, decoders, and encoders to the system, click 
. The network is scanned for 
new devices. NVRs and decoders are automatically added to your system. Encoders must be 
manually assigned to NVRs, even if they are not recorded. Otherwise they are not part of your 
system. The NVRs manage events and recording for their assigned cameras. 
Unassigned encoders do not appear in the Device Tree. They are not part of your system until 
you assign them to an NVR. 
Note:
Video data from encoders that are assigned to an NVR, is always encoded with MPEG-4.
Devices are represented in a tree and grouped by the physical network structure and the 
device categories.
Video sources like encoders are grouped under NVRs. Digital video recorders such as DiBos 
are listed separately.
 NVR & Decoder Scan
Click to display the Network Scan dialog box. 
Scans the network for NVRs, decoders, and encoders. When the scan process is finished, a 
dialog box for assigning the detected encoders to NVRs is displayed.
 VRM & iSCSI Devices Scan
Click to display the Bosch VMS Scan Wizard dialog box.
Scans the network for VRMs, iSCSI devices, live only encoders, local storage encoders, or 
VIDOS NVRs.
Click to display the Failover NVR Manager dialog box.
Click to display the IP Device Configuration dialog box.
Click a tree item to display the corresponding pane.
17.1
Initial Device Scan dialog box
Main window > Hardware menu > Initial Device Scan... command
Displays the devices which have duplicate IP addresses or a default IP address (192.168.0.1).
Allows you to change such IP addresses and subnet masks.
You must enter the correct subnet mask before changing an IP address.
17.2
Network Scan dialog box
Main window > 
 Devices > 
 NVR & Decoder Scan
Displays detected encoders, NVRs, and decoders.