Bosch ltc-0335-28 Installation Instruction
Bosch Video Management System
Devices page | en
87
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
Remove All
Click to remove all devices from their parent device. The recordings of a removed device are
not removed. You can find them when you add this device again.
17.4
Failover NVR Manager dialog box
Main window >
Devices >
Displays status information on your Failover NVRs.
17.5
IP Device Configuration dialog box
Main window >
Devices >
Displays the following properties of the available IP devices:
–
Device name and type
–
IP address
–
Subnet mask
–
System password
–
Firmware version
–
Gateway IP address
Allows you to set the following properties of the available IP devices:
–
Display name
–
IP address
–
Firmware version
You can configure display names, IP addresses and firmware versions for multiple devices at
once.
Update Firmware
Click to update the firmware version of the selected device.
Apply
Click to configure the devices with the entered values without closing the dialog box.
17.6
Set IP Addresses dialog box
Main window >
Devices >
> IP Device Configuration dialog box > Right-click two
or more entries > Click Set IP Addresses...
Allows you to set the IP addresses for multiple IP devices.
Start with:
Type the first IP address.
End with:
Displays the last IP address for the selected devices after having clicked Calculate.
Calculate
Click to calculate the range of IP addresses for the selected devices.