Bosch ltc-0335-28 Installation Instruction

Bosch Video Management System

 Devices page | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

Main window > 

 Devices > Expand 

 > 

Allows you to add and configure analog monitor groups. You assign an analog monitor group to 

a Bosch Video Management System workstation in 

.

Main window > 

 Devices > Expand 

 > 

 > Settings tab

Allows you to perform the following tasks:

–

Configure an analog monitor group

–

Assign decoders to an analog monitor group

–

Enable quad view for decoders that support quad view

Type the name of the analog monitor group.

Enter the number of columns for the analog monitor group. The result is displayed.

Enter the number of rows for the analog monitor group. The result is displayed.

Drag a decoder to an available analog monitor.

The white number, if present, displays the logical number of the initial camera. The black 

number displays the logical number of the decoder.

Right-click an analog monitor image to toggle between single view and quad view. On the 

Advanced Configuration page, the Quad View column displays the corresponding setting.

To un-assign a decoder, right-click the analog monitor image and click Clear Monitor.

Main window > 

 Devices > Expand 

 > 

 > Advanced Configuration tab

Allows you to perform the following tasks:

–

Configure the logical number of a decoder or decoder channel.

–

Enable quad view for decoders that support quad view

–

Configure the OSD.

Note the following hints on switching the decoder between quad view and single view in the 

Operator Client:

–

The user can manually switch the decoder back to single view when it is configured as 

quad view.

We do not recommend configuring quad view for H.264 cameras.