Bosch ltc-0335-28 User Guide

Bosch Video Management System

 Using a CCTV keyboard | en

Bosch Sicherheitssysteme GmbH

Operator's Manual

Operator Client | V3 | 2010.07

If the keyboard is connected to a decoder, the feature set is reduced. Only the analog mode is 

available.

The keyboard must be connected to a COM port of a workstation.

1.

Start the Operator Client on the workstation.

2.

Press the Prod button.

The keyboard scans for connected devices. 

3.

Press the Terminal softkey.

The Selection Mode is displayed.

You can use the keyboard in the following modes:

–

Selection Mode

This mode allows you to select an Image pane by moving the joystick in the desired 

direction. 

–

This mode allows you to control fixed and PTZ cameras, maps, and documents in Live 

Mode.

–

Jogshuttle Mode

This mode allows you to control cameras in instant playback or in Playback Mode.

To enter Selection Mode:


Start the Operator Client and the keyboard. 

or



Press ENTER to leave PTZ or Jogshuttle Mode and to return to Selection Mode.

1.

Select a PTZ camera. 

2.

Press Shot. 

To start a preposition, press Shot again, press the number of a preposition, and press 

ENTER.

1.

Start Playback Mode.

2.

Press Shot. 

To leave PTZ or Jogshuttle Mode:


Press ENTER to leave PTZ or Jogshuttle Mode and start Selection Mode again.

Enter a numeric command to display the camera with this logical number in the active Image 

pane or analog monitor.

Toggling between analog mode and workstation mode


Press Mon twice.

1.

Switch to a digital mode.

2.

Press Mon, press 1 - 4 to select the desired workstation monitor, press the number of 

the desired Image pane and press ENTER.

The numbering of Image panes is from left to right and top to bottom.