Bosch ltc-0335-28 User Guide

en | Using a CCTV keyboard

Bosch Video Management System

Operator Client | V3 | 2010.07

Operator's Manual

Bosch Sicherheitssysteme GmbH

3.

Press the desired number of the camera and press ENTER.

The desired camera is displayed.

Example: Press Mon, 412, and ENTER. Then press 7 and ENTER. Camera 7 is displayed 

on the 12th Image pane on workstation monitor 4.

1.

Switch to analog mode.

2.

Press Mon, press the number of the desired monitor, and press ENTER.

Monitor numbers are configured in the Configuration Client.

3.

Press the desired number of the camera and press ENTER.

The desired camera is displayed.

Example: Press Mon, 3, and ENTER. Then press 4 and ENTER. Camera 4 is displayed in 

the 3rd analog monitor.

In Selection Mode, the joystick allows you to use the following features:

–

Tilt the joystick to select an Image pane.

In PTZ Mode, the joystick allows you to use the following features:

–

Twist the joystick to zoom in and out.

–

Tilt the joystick to pan and tilt a PTZ camera.

–

Use Focus and Iris buttons for a PTZ camera.

In Jogshuttle Mode, twist the joystick to use the following features:

–

Play forward/backward as long as you twist.

–

Change the playback speed: Speed depends on the degree of rotation.

–

Stop a video when playing.

In Jogshuttle Mode, tilt the joystick to use the following features:

–

Tilt up / down when video is stopped: Play forward / backward.

–

Tilt up / down when video is playing: Set the playback speed.

–

Tilt right / left: Pause and step forward / backward.

In Jogshuttle Mode, the Focus and Iris buttons allow you to use the following feature:

–

Press Focus or Iris to move the hairline in the Timeline forward or backward. Focus 

moves the hairline for a larger amount of time forward or backward, Iris moves the 

hairline for a smaller amount of time forward or backward.

–

To lock the system in the current playback speed, press the Shot button while twisting 

the joystick.

The following operation modes are available:

–

Tree Mode

You use this operation mode to control devices that are available in the Logical Tree of 

the Operator Client.

–

Command Mode

You use this operation mode to send commands like switch to Playback Mode.

When you call up a PTZ camera by a numeric command, the system automatically enters PTZ 

mode.