Lexmark X792de Quick Setup Guide

Replace the print cartridge of the color with the repeating defect, if the print defects occur in the following instances:

in every 37.7 mm (1.48 in.) of the page

in every 41.6 mm (1.64 in.) of the page

in every 42.7 mm (1.68 in.) of the page

in every 94.3 mm (3.71 in.) of the page

Replace the fuser if print defects occur in the following instances:

in every 95.0 mm (3.74 in.) of the page

in every 146.7 mm (5.78 in.) of the page

These are possible solutions. Try one or more of the following:

Move the length and width guides in the tray to the correct positions for the paper size loaded.

Make sure the guides are not too far from the paper stack.

Make sure the guides are not pressing too lightly against the paper stack.

Make sure you are using paper that meets the printer specifications.

Remove the print cartridges.

Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.

Reinsert the print cartridges.

Note: If the quality does not improve, replace the print cartridges.

Troubleshooting

310