Lexmark x6570 User Guide

Did you find the problem?

If USB Host Controller and USB Root Hub are not listed,
the USB port is not enabled. For more information, see
the computer documentation.

Contact the Customer Support Center.

Click Start 

Œ Programs or All Programs Œ

Lexmark 6500 Series.

Click Solution Center.

Click the Contact Information tab.

The printer and the computer cannot exchange data.

These are possible solutions. Try one or more of the following:

For more information, see “Bidirectional communication is not established” on page 170.

If the power light is blinking on and off slowly, the printer is in sleep mode.

Unplug the power cable from the wall outlet.

Wait ten seconds, and then insert the power cable into the wall outlet.

Press 

 to turn the printer on.

You must know the security key and security mode in order to properly set up the printer for use on the wireless
network. To obtain this information, see the documentation that came with your wireless router, see the Web page
associated with the router, or consult the person who set up your wireless network.

A security key is like a password. All devices on the same network share the same security key.

Note: Make sure you copy down the security key exactly, including any capital letters, and store it in a safe place
for future reference.

The security key must follow the following criteria.

Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F and 0–9.

Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard.

Up to 64 hexadecimal characters. Hexadecimal characters are A–F and 0–9.

Between 8 and 64 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard.