TallyGenicom 2440 User Guide
Operating the printer
Paper handling
2-21
Unloading Continuous Forms
To unload continuous forms:
The printer can retract continuous forms-paper by a recommended maximum of 30.48 cm
(12 inches) per operation.
(12 inches) per operation.
6.
Repeat the procedure for the left tractor
and adjust the left forms tractor to
accommodate the width of the form.
and adjust the left forms tractor to
accommodate the width of the form.
7.
Move the left tractor to make the paper
flat. Do not stretch the paper too taut.
Push the left locking lever down to
secure the tractor in place.
flat. Do not stretch the paper too taut.
Push the left locking lever down to
secure the tractor in place.
8.
Reinstall the manual paper feeder.
9.
Press the FF/LOAD key to advance
the paper to the top-of-form position
from which printing can start. The
printer is automatically placed in the
Online State.
the paper to the top-of-form position
from which printing can start. The
printer is automatically placed in the
Online State.
1
Make sure that the Paper Select lever is set to the continuous forms position.
2
Press the PARK key. The continuous forms paper is retracted to the park position. If
the paper cannot be retracted in one operation, continue to press the PARK key until
the paper is parked.
the paper cannot be retracted in one operation, continue to press the PARK key until
the paper is parked.