TallyGenicom 2440 User Guide
Special mode
Set-Up mode
4-7
Options with Undetermined Values
For top and bottom margin parameters, you can choose among a continuous range of
values.
values.
Example: Changing the Top Margin of the Single Sheet Feeder
This example shows how to change the top margin of the single sheet feeder from 0/
72 inch to 3/72 inch.
This example shows how to change the top margin of the single sheet feeder from 0/
72 inch to 3/72 inch.
1
Enter the Set-Up mode: Turn the printer off and back on while pressing the SEL/
MENU key.
MENU key.
2
Select the FRICTION function: Wait for the printer to stop printing and press the
PARK/PRINT/
PARK/PRINT/
T
key seven times to select the FRICTION function.
3
Press the FF/LOAD/Micro Feed Up/
X
key to print the LPI parameter.
4
Press the PARK/PRINT/
T
key to print the TOP MARGIN parameter.
5
Press the FF/LOAD/Micro Feed Up/
X
key to print the current top margin value.
6
Repeatedley press the PARK/PRINT/
T
or the TEAR/
S
key until the desired
value is printed.
7
Press the SEL/MENU key to select the desired value and to activate the
SAVE&EXIT position.
SAVE&EXIT position.
8
Press the SEL/MENU key again to save the new value and exit the Set-Up mode
and return to the Ready state. These setting remain in effect until the next time they
are changed.
and return to the Ready state. These setting remain in effect until the next time they
are changed.
Points to Remember
`
We recommend that you use continuous forms paper for printing in the Set-Up mode
because the output will exceed a single page.
because the output will exceed a single page.
`
Whenever you enter the Set-Up mode, short help menus are printed at the top of the
page. Use the help menus for quick reference while in the Set-Up mode.
page. Use the help menus for quick reference while in the Set-Up mode.
`
When printing the option for each function, you can move either forward or backward
in the option list. To move forward (print the next option), press the PARK/PRINT/
in the option list. To move forward (print the next option), press the PARK/PRINT/
T
key. To move backward (print the previous option), press the TEAR/
S
key.
`
While in the <FUNCTIONS> menu or when selecting a function that contains op-
tions and selectable values, press the SEL/MENU key to reprint the
<FUNCTIONS> menu SAVE&EXIT.
tions and selectable values, press the SEL/MENU key to reprint the
<FUNCTIONS> menu SAVE&EXIT.